Dalton Clutch Kit install and Review - Page 11
Page 11 of 15 FirstFirst ... 9 10 11 12 13 ... LastLast
Results 151 to 165 of 216
Like Tree125Likes

Thread: Dalton Clutch Kit install and Review

  1. #151
    Senior Member
    Join Date
    Feb 2015
    Location
    North oregon coast
    Posts
    801
    Member #
    4635
    Liked
    397 times
    Quote Originally Posted by mcdougall20 View Post
    When I sent evo the computer I told them all the modifications I was running and they said they would tune it for that, and I had the whole clutch apart just before this and everything was good rollers had a little side to side movement but rolled great freely still, could the ride height of belt be it possibly where should it be riding mines pretty much flush with sheaves.. so pretty confused what's going on
    Were you getting more rpms before?
    2016 sport xt
    Beard padded harnesses
    Arctic cat front and rear bumper
    Arctic cat shoulder bag
    SAK PARK BRAKE

    arctic cat soft top
    DRAGONGUNNER master cylinder guard
    rear cover heat mod
    Arctic cat door extentions custom painted
    evo air intake
    cat removed muffler

    2014 trail (sold)

  2. #152
    Member
    Join Date
    Jul 2016
    Posts
    47
    Member #
    12106
    Liked
    6 times
    I believe I was not sure to be exact... I just did a over haul on it put the pipe and muffler, evo flash and clutch kit in all at once
    de3 likes this.

  3. #153
    Supporting Member
    Supporting Member

    Join Date
    Jul 2013
    Location
    Parkersburg W.V.
    Posts
    5,169
    Member #
    2460
    Liked
    2991 times
    Quote Originally Posted by mcdougall20 View Post
    I believe I was not sure to be exact... I just did a over haul on it put the pipe and muffler, evo flash and clutch kit in all at once


    Yea for sure something isn't right,I have the 3/8 weight in now going to the 1/2 weight,turns to many RPM's with the 3/8 weight
    2015 Wildcat Sport............Kryptic SxS Tie Rods........
    Heretic Steering wheel......SATV Arched front/ Rear A-Arms
    AJ's roof...........................Dalton Clutch kit
    AJ's tub guards..................Wetsounds
    AJ's flares........................Wicked Bilt P/S
    A/C Door Storage Bags.
    Venetta front/Dragonfire rear bumper
    Rugged Radio 242 intercom system
    A/C Full windshield
    A/C Roll up rear window
    Q6 Speedwerx muffler
    Speedwerx secondary spring
    Teflon washers
    sax park brake
    EVO III ECU
    Kimpex Rear storage box
    30''Awesomeoffroad light bar
    SuperBrightLed Headlights
    AJ's radiator guards
    razorback technology 3.0 CVT belt temp gauge
    Dragonfire billet fire extinguisher bracket.
    30x10x14 original Bighorns/with STI Beadlocks
    Dragonfire GT Seats
    Dragonfire Harnesses
    Dual 3' Booger Whips
    Trail Armor skids with Sliders
    Speedwerx Throttle spring.
    Dragonfire Backbone Down Bars

  4. Remove Advertisements
    WildcatForums.net
    Advertisements
     

  5. #154
    Member
    Join Date
    Jul 2016
    Posts
    47
    Member #
    12106
    Liked
    6 times
    Yeah I have no weights in now and still won't reach 73-7400...

  6. #155
    Supporting Member
    Supporting Member

    Join Date
    Mar 2015
    Location
    North Carolina
    Posts
    3,178
    Member #
    4758
    Liked
    1852 times
    the ribs on top of the belt for airflow should be higher than the top of the sheve by a little bit
    JRI:ECX3 Shocks
    SpeedWerx:Full Exhaust,Motor,Full Clutch

    Kryptic SxS:Cage,nerfbars,TieRods,AArms

    PACE:SwayBar
    SSS OffRoad:KOHSkid
    SuperATV:RhinoAxles,EPS
    GBC: Tires
    Raceline: Wheels
    Custom Dual Rates/valving
    Sponsors:
    Dirt Decalz
    Brian@JRI
    Rick@SSS Offroad
    Jeremy@Speedwerx
    GBC
    Mark@MLS
    Dave@Kryptic SxS
    Ryan@Raceline
    Corey@SuperATV

  7. #156
    Member
    Join Date
    Jul 2016
    Posts
    47
    Member #
    12106
    Liked
    6 times
    How many shims should be running? That's what adjust the belt height correct? Shims in middle of sheaves

  8. #157
    Supporting Member
    Supporting Member

    Join Date
    Mar 2015
    Location
    North Carolina
    Posts
    3,178
    Member #
    4758
    Liked
    1852 times
    not really, but kinda.....there is a tool from speedwerx that you need. tolerance is .030" but u have to have the tool to even understand what to measure.
    Clutch Alignment Bar // Arctic Cat Wildcat Trail / Sport 700 Models
    JRI:ECX3 Shocks
    SpeedWerx:Full Exhaust,Motor,Full Clutch

    Kryptic SxS:Cage,nerfbars,TieRods,AArms

    PACE:SwayBar
    SSS OffRoad:KOHSkid
    SuperATV:RhinoAxles,EPS
    GBC: Tires
    Raceline: Wheels
    Custom Dual Rates/valving
    Sponsors:
    Dirt Decalz
    Brian@JRI
    Rick@SSS Offroad
    Jeremy@Speedwerx
    GBC
    Mark@MLS
    Dave@Kryptic SxS
    Ryan@Raceline
    Corey@SuperATV

  9. #158
    Supporting Member
    Supporting Member

    Join Date
    Oct 2015
    Location
    Chesterfield Michigan
    Posts
    1,904
    Member #
    5650
    Liked
    1550 times
    Just installed my AJ's bushings(rear) and my dalton clutch kit, I put the 3/8 weights in, I have 28x10x15 Moto MTC tires, probably should have put the the 1/2 weights in but I'll try and get a chance this weekend to run around the neighbor hood since the park out front looks like lake Michigan right now.
    Very simple install except I think it was Drock that broke a cover screw, I did the same thing, oh well poo happens! LOL

    I'll let ya know what I think after I take a short ride.
    de3 likes this.
    Ray
    2016 Wildcat Trail Special Edition
    DG Offroad cage, PRP seats, Dragonfire Harness Bar, Dragonfire rear bumper
    Pro Armor 4pt 3' harness, AC front bumper, Dragongunner Master Cylinder Cover
    UTV Fire Extinguisher, Viper Max Winch, Speedwerx Secondary Clutch Spring
    AXIA Alloys panoramic mirror, Seizmik Pursuit mirrors, FUTV 1/2 skids AJ'S Flares
    Awesome Offroad 40" LED light bar, 2- Awesome Offroad 2x2 LED cubes
    Rugged Radio & intercom system

  10. #159
    Senior Member
    Join Date
    Nov 2015
    Posts
    280
    Member #
    5716
    Liked
    172 times
    I don't know your altitude but I think you will end up with the 3/8 weights. I am around 2000' with 27" kenda HTRs (heavy) and I landed on 3/8" weights. Dalton recommended 1/2" weights for 27" tires I believe. I tried that and wasn't hitting the higher RPMs. It really got bad if I went up in elevation. I dropped to the size recommended for 28" tires and it works much better especially if I am in sand or got up in elevation.
    raynmary and de3 like this.

  11. #160
    Senior Member
    Join Date
    Jun 2014
    Location
    Ottawa, Ontario, Canada
    Posts
    198
    Member #
    3642
    Liked
    36 times
    Can this kit be installed without a puller or compression tool?

    Sent from my LG-H812 using Tapatalk
    '14 Wildcat Trail
    26'' Traxion Grippers
    12" ITP Hurricanes
    Direction 2 ...1/4 Windshield
    Direction 2 ...Rear Windshield
    Kimpex Storage Box
    VIP-AIR Fender Flares
    Kawell 6" LED Fog Lights x2
    Green LED Rock Lights
    Bimini Roof
    Kolpin Mirrors
    Dalton Clutch Kit

    Live in Ottawa, ON, but ride in Quebec

  12. #161
    Supporting Member
    Supporting Member

    Join Date
    Mar 2015
    Location
    North Carolina
    Posts
    3,178
    Member #
    4758
    Liked
    1852 times
    You don't need a puller. If you back up a few pages. You will see my detailed installation instructions.


    Sent from my iPhone using Tapatalk
    maverickmarc likes this.
    JRI:ECX3 Shocks
    SpeedWerx:Full Exhaust,Motor,Full Clutch

    Kryptic SxS:Cage,nerfbars,TieRods,AArms

    PACE:SwayBar
    SSS OffRoad:KOHSkid
    SuperATV:RhinoAxles,EPS
    GBC: Tires
    Raceline: Wheels
    Custom Dual Rates/valving
    Sponsors:
    Dirt Decalz
    Brian@JRI
    Rick@SSS Offroad
    Jeremy@Speedwerx
    GBC
    Mark@MLS
    Dave@Kryptic SxS
    Ryan@Raceline
    Corey@SuperATV

  13. #162
    Supporting Member
    Supporting Member

    Join Date
    Jul 2013
    Location
    Parkersburg W.V.
    Posts
    5,169
    Member #
    2460
    Liked
    2991 times
    Quote Originally Posted by raynmary View Post
    Just installed my AJ's bushings(rear) and my dalton clutch kit, I put the 3/8 weights in, I have 28x10x15 Moto MTC tires, probably should have put the the 1/2 weights in but I'll try and get a chance this weekend to run around the neighbor hood since the park out front looks like lake Michigan right now.
    Very simple install except I think it was Drock that broke a cover screw, I did the same thing, oh well poo happens! LOL

    I'll let ya know what I think after I take a short ride.

    Ray have you got to test your dalton kit yet.
    2015 Wildcat Sport............Kryptic SxS Tie Rods........
    Heretic Steering wheel......SATV Arched front/ Rear A-Arms
    AJ's roof...........................Dalton Clutch kit
    AJ's tub guards..................Wetsounds
    AJ's flares........................Wicked Bilt P/S
    A/C Door Storage Bags.
    Venetta front/Dragonfire rear bumper
    Rugged Radio 242 intercom system
    A/C Full windshield
    A/C Roll up rear window
    Q6 Speedwerx muffler
    Speedwerx secondary spring
    Teflon washers
    sax park brake
    EVO III ECU
    Kimpex Rear storage box
    30''Awesomeoffroad light bar
    SuperBrightLed Headlights
    AJ's radiator guards
    razorback technology 3.0 CVT belt temp gauge
    Dragonfire billet fire extinguisher bracket.
    30x10x14 original Bighorns/with STI Beadlocks
    Dragonfire GT Seats
    Dragonfire Harnesses
    Dual 3' Booger Whips
    Trail Armor skids with Sliders
    Speedwerx Throttle spring.
    Dragonfire Backbone Down Bars

  14. #163
    Senior Member
    Join Date
    Jun 2014
    Location
    Ottawa, Ontario, Canada
    Posts
    198
    Member #
    3642
    Liked
    36 times
    Just got my kit! Excited to see how it changes things.

    Sent from my LG-H812 using Tapatalk
    '14 Wildcat Trail
    26'' Traxion Grippers
    12" ITP Hurricanes
    Direction 2 ...1/4 Windshield
    Direction 2 ...Rear Windshield
    Kimpex Storage Box
    VIP-AIR Fender Flares
    Kawell 6" LED Fog Lights x2
    Green LED Rock Lights
    Bimini Roof
    Kolpin Mirrors
    Dalton Clutch Kit

    Live in Ottawa, ON, but ride in Quebec

  15. #164
    Member
    Join Date
    Jul 2016
    Location
    Pittsburgh PA
    Posts
    54
    Member #
    12194
    Liked
    18 times
    The Dalton kit helped my cat out alot. I had the speedwerx secondary spring and I lost top speed. Installed this kit gain MPH and alot more get up and go. I have 27" tires, I used the 1/2in screws and when I would punch it from the start I would hit the rev limiter, so I put the 3/8in screws in going to see if that makes a difference, hopefully going to get to try it out this weekend.

  16. #165
    Supporting Member
    Supporting Member

    Join Date
    Mar 2015
    Location
    North Carolina
    Posts
    3,178
    Member #
    4758
    Liked
    1852 times
    Quote Originally Posted by maverickmarc View Post
    Just got my kit! Excited to see how it changes things.

    Sent from my LG-H812 using Tapatalk
    awesome, just remember i have a step by step instructions on previous pages.
    JRI:ECX3 Shocks
    SpeedWerx:Full Exhaust,Motor,Full Clutch

    Kryptic SxS:Cage,nerfbars,TieRods,AArms

    PACE:SwayBar
    SSS OffRoad:KOHSkid
    SuperATV:RhinoAxles,EPS
    GBC: Tires
    Raceline: Wheels
    Custom Dual Rates/valving
    Sponsors:
    Dirt Decalz
    Brian@JRI
    Rick@SSS Offroad
    Jeremy@Speedwerx
    GBC
    Mark@MLS
    Dave@Kryptic SxS
    Ryan@Raceline
    Corey@SuperATV


 
Page 11 of 15 FirstFirst ... 9 10 11 12 13 ... LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Fan Override Kit, Install and Review
    By SandSissy in forum Issues and Resolutions
    Replies: 26
    Last Post: 05-29-2017, 03:57 PM
  2. Dalton Clutch Install
    By Arizonacrawler in forum Wildcat Performance Modifications
    Replies: 72
    Last Post: 10-05-2015, 12:29 PM
  3. Dalton clutch kit
    By Bigpig69 in forum Wildcat General Discussion
    Replies: 45
    Last Post: 08-19-2015, 07:30 AM
  4. First Impressions Dalton Clutch Kit
    By Rasty1 in forum Wildcat Performance Modifications
    Replies: 16
    Last Post: 07-20-2015, 06:50 PM
  5. Dalton clutch kit for Wildcat X with Team clutch
    By adubaz7 in forum Wildcat Parts and Products For Sale
    Replies: 9
    Last Post: 01-02-2015, 07:16 PM

Search tags for this page

2015 arctic cat wildcat sport clutch kit

,
bikeman vs speedwerx wildcat clutch
,
dalton clutch install without clutch puller or t60 torx
,

dalton clutch kit

,
dalton clutch kit for a arctic cat wildcat sport
,
dalton clutch kit for wildcat sport reviews
,
dalton cluth vs epi for wildcat sport
,
dillom hiper favorit list
,

speedwerx clutch kit wildcat x reviews

,
wildcat trail dalton clutch kit
Click on a term to search for related topics.
Powered by vBulletin® Version 4.2.3
Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
All times are GMT -6. The time now is 09:31 PM.