Wildcat Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
680 Posts
Discussion Starter #1 (Edited)
Reduced to $11,000

2013 Arctic Cat Wildcat For Sale


  • Multiple year winning car
  • Consistent podium finishes in races and series.
  • Over $30,000 invested into it.
  • Has everything you need to go racing!
  • Fully documented build with pics available on request.
  • Racing pics below details.
Details and Specs:

  • MLS Powersports
    • 2013 Arctic Cat Wildcat 1000 H.O.
    • 2013 Wildcat 1000 X motor
    • 2014 Wildcat 4X front dual piston calipers, knuckles, brake lines (Big Brake kit)
    • 2015 Wildcat X starter and starter idler gears
    • 2014 Aluminum steering slider

  • SuperUTV
    • Full set of Rhino Chromoly Axles
    • Spare axles for front and rear

  • GMZ Race Products
    • 6 x 30”x10”x14” Kahuna Tires
      • All tires are 95% or more tread
    • 6 x 14” LiteLoc Bead Locks

  • Evolution Powersports Add-Ons
    • ECU Flash
      • Maximize power with their exhaust
      • About 30% increase total with other mods done.
      • Approx 120 hp
    • Chromoly upper & Lower A-Arms with ball studs
    • T6 6061 Tie Rods
    • Bullet Exhaust

  • Factory UTV
    • ½” skid plate
    • ½” rocker planel skids plates
    • ½” A-Arm skid plates

  • IronMan4x4fab.com
    • Full set of custom T6 7075 Radius Rods w/ 3/4” heims

  • Rugged Radios
    • 50 watt Vertex 2200 Radio
    • 357 VOX Intercom integrated into radios with PTT
    • PTT Switches for driver & codriver
    • Interface cables to GoPro cams
    • 1/4 wave mass above metal plan for best reception and tuning

  • FOX
    • Front 2.0 Podium RC2 coil over shocks w/ reservoir and DCS
    • Rear 2.5 Podium RC2 coil over shocks w/ reservoir and DCS

  • UTV Inc
    • A-Arm Gusset Kit

  • Switches
    • OTRATTW
      • 7 Carling Technology custom labeled switches for:
        • 42” LED light bar
        • Winch In/Out
        • Locker Switch separated from 4 wheel drive button so easier to engage while racing.
        • Siren/Horn
        • CVT Blowers
        • Rear Light Bar Array
        • Cooling Fan OverRide
    • Factory
      • 4 wheel drive
      • Reverse override
      • Headlights

  • Custom Fabricated
    • Custom snorkel/ram air intake
    • Custom CVT double blower
      • Side 4” intake
      • Top 3” exhaust
    • Custom DOM cage
    • Custom DOM Doors with A-pillar tie-in/support
    • Rear Light box
      • Amber, flashing Blue & Brake LED Lights to meet most race series requirements.
    • 12 mm wheel stud upgrade w/ tuner locking lugs
    • Custom DOM Tire mount system
    • Custom mounts for tool box
    • PCI Radios center console customized for Rugged Radios gear

  • Safety
    • Beard
      • Ultra T1 racing seats
      • 5 point 2” padded harnesses
    • 2 steel handle fire extinguishers
    • Aluminum T-Bar for codriver
      • w/PTT and horn button
    • Liquid Industries side mirrors & mounts
      • Tube clamps and connectors
    • Smittybilt Winch
      • JM Rigging Supply Synthetic winch line with thimble and D-ring
      • Warn mount kit for Wildcat
      • Custom top hood mount engage/disengage switch made to look like an old time toy on/off switch
      • Custom mounted plug for external winch control.
    • Alba Racing aluminum front bumper
    • OEM aluminum rear bumper
    • Two rear number plates for easy viewing

  • Misc Performance Upgrades
    • K&N
      • Air filter
      • Pre-filter
    • 42” LED light bar
    • GloShift Dual Zone Air temp gauge for CVT setup
    • FrogSkinz 1” and 2” membranes for CVT cover
    • Gas and rear diff vent runs up high on cage for water forging protection
    • Battery Tender
      • Lithium Iron Phosphate Battery
      • Weights only 3 lb.
      • Multiple connection points for accessories.
    • Aerodynamic Shark fin on roof that adds 10 hp and 20 mph! ;) LOL!

  • Spare Parts included
    • Front Differential
    • Brand new starter motor
    • Stock tie rods
    • Stock full set of axle shafts
    • H.O. gauge cluster
    • 2 ECU’s (1 HO and 1 stock X)
    • OEM starter and idler gears
    • Starter clutch
    • Coil
    • Starter relay/solenoid
    • Thermostat & Temp sensor
    • Extra upper rear control arm
    • Extra Kevlar CVT belt mounted on tire carrier

Asking Price:
- $30,000 invested and only asking $11,000!
- Only trade I will entertain is a 2 seat smaller comp ready buggy capable of being a WEROCK ProMod class contender.

- Located in Marietta, GA. Delivery to most East Coast places possible.


a-KitKat-DSC_0099.jpg

a-KitKat-Dust-2-DSC_0078.jpg

a-KitKat-turn-3-IMG_8253-600-website-copy.jpeg

 

Attachments

·
Registered
Joined
·
680 Posts
Discussion Starter #2
$16,500 Nego.
 

·
Registered
Joined
·
11,034 Posts
GOOD LUCK ON THE SALE !!!!!!l
 
  • Like
Reactions: BMan

·
Registered
Joined
·
680 Posts
Discussion Starter #4
Dropping for the Holidays to 1/2 of what is invested into it. Now only $15,000. Let me put a bow on it and put it under your XMas tree for ya! :D
 

·
Registered
Joined
·
680 Posts
Discussion Starter #5
We will entertain reasonable offers so don't hesitate to PM me!
 

·
Registered
Joined
·
680 Posts
Discussion Starter #6
TTT Sitting here collecting dust since we're focused on WEROCK rock crawling. Come take it away. 30K invested and it can be yours for $11K.
 
1 - 6 of 6 Posts
Top