Wildcat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have been scouring the forum and the web trying to find a solution for this, with no such luck. Wondering what others have done to add a window wiper solution to the Wildcat XX.

I do have several ideas in mind, but curious what others have done. I do see the "universal" kits with hand crank wiper solutions on the net, but they don't look like a viable solution when your trying to get through mud and operate the vehicle at the same time.

Any feedback would be greatly appreciated.

Thanks
 

·
Registered
Joined
·
2 Posts
I was gifted a universal electric kit for the poly windshield, this is how I mounted it on mine. After using it on the last run I'll buy a second and wire the two together on a switch that will go in the center panel. Right now I have it wired direct to one of the existing SAE plugs under the hood and use the switch on the motor case. You have some freedom in how you mount the motor in relation to the wiper arm, you can clock it to whatever position you prefer and lock it to the shaft with a set screw. It has a 90 degree sweep.
 
1 - 3 of 3 Posts
Top