Wildcat Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3,030 Posts
I did also...and yes the nut was crazy tight!!! My 3/4 Milwaukee wouldn't take it off!! Think it's rated at something like 1800ft lbs. Not one problem with the new axles in 1400 dune miles.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
685 Posts
How are the 2020s different than the 2018s?
 

·
Registered
Joined
·
187 Posts
There are basically three rear axles, the only difference is how this slip either in the CV cup or on the shaft. Width and mounting are no different.
2018 "Gen1" slips in the CV and has a 8-rib boot. Most failures were poor QC from textron not aligning the trailing arm properly.
2019-late "Gen2" same axle as Gen1 but will 11-ribs
2020 to current "Gent3) different axle with a slip in the middle of the shaft 3-boots
 
1 - 10 of 10 Posts
Top