[NS Wildcat trail]

We know that a few on here (DRock can likely fill a few pages on here.) Attached is one of mine.
Door inserts. Pretty happy with the way they turned out. I used Lexan as it was free. I'm into this project for $0!
A buddy of ,mine also has a custom shop, and one of the things they do is Vinyl, car wraps etc...he hooked me up with some Vinyl to cover the Lexan, not too bad!

 

[969tm]

Shocks, air scoops and zerk fittings

 

[NS Wildcat trail]

1/4 Windsheild using AC short base.

 

[dragongunner]

Aluminum mud and side guards.



Mud Flares.





Engine air vents.

 

[DRock]

I might do a few things to mine when i get the time

 

[NS Wildcat trail]

I might do a few things to mine when i get the time

Ha,Ha!

 

[DRock]

Ha,Ha!

I dont want to seem like an over-achiever, i already post way to much haha. All i did today was paint my door frame, finished mocking up my motor mounts, and put a stock and scope on the new rifle. Slow day.

 

[Artman]

Foot rest for the wife (she has MS and having both feet resting even helps with her fatigue believe it or not)

Led head lights and trail lights (stock light left LED right. lows and highs next right).

Storage rack.

 

[TN6680]

Artman, on the LED headlight bulds, where did you get them? part #?

 

[Artman]

4 pipe snorkel (2-2" intakes, 1-2" CVT intake, 1-2" CVT exhaust).

Check plate Aluminum Visor. (Just below the AC roof)

 

[Artman]

Artman, on the LED headlight bulds, where did you get them? part #?

Got the blubs off Ebay
2X 80W CREE White H4 High Power LED 12V 24V DRL Daytime Running Low Beam Accent | eBay
Side note they do have a H4 connector but the bulbs are the same for low and high beam there is no "high beam" but it does stay on. That is why I wired in the work lights to the high beam circuit so when I flip it to highs i get them all without an added switch.

 

[Artman]

View attachment 21215 Shocks, air scoops and zerk fittings

What shocks did you get how much time have you put on them (ride quality) and how much did they set you back. Im pretty interested in the bandit set that was posted on another thread but I cant tell what these shocks are.

 

[NS Wildcat trail]

View attachment 21219





Very Nice Artman!
Foot rest for the wife (she has MS and having both feet resting even helps with her fatigue believe it or not)
View attachment 21224 View attachment 21221
Led head lights and trail lights (stock light left LED right. lows and highs next right).
View attachment 21222 View attachment 21223
Storage rack.

Very Nice Artman!

 

[NS Wildcat trail]

Keep the posts coming Guys!

 

[LARRY01Z28]

great idea man

 

[969tm]

What shocks did you get how much time have you put on them (ride quality) and how much did they set you back. Im pretty interested in the bandit set that was posted on another thread but I cant tell what these shocks are.

Go to post"Aftermarket shocks" I posted the info there.

 

[cstivason36]

I did my own fender flares and brake reservoir guard. I have a few other ideas in mind, but I don't have easy access to a set of torches...damn.

 

[DRock]

I just use a regular propane torch, nothing fancy. Heat gun is good and a hair dryer will work on the thinner stuff.

 

[SteveAhReeno]

That master cylinder project is a nice little one I'd like to get done eventually - may have a piece of HDPE sitting around waiting for my torch to bend

 

[DRock]

That master cylinder project is a nice little one I'd like to get done eventually - may have a piece of HDPE sitting around waiting for my torch to bend

When you buy that new heavy duty skid plate youll have a nice sheet of plastic to bend up when you recycle that oem skid