Wildcat Forum banner
1 - 20 of 25 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
What is a good cross-reference to the oil filter?
I ask because from the Alachua Fl. dealership to Valdosta GA is 2 hours.
Mobil 1 makes the 0-40w oil that's required for the oil change.
 

·
Registered
Joined
·
88 Posts
Napa 1359 is what I run on my Prowler.
Over on arctic chat . com is a complete cross over list with more manufactures.
 

·
Registered
Joined
·
88 Posts
Good thread on wet clutch oil.
The official what OIL to use thread!! - ArcticChat.com - Arctic Cat Forum

Oil filter info copied from arcticchat.....

For the Cat H1/H2 or Suzuki engines. the following filters cross reference.

Arctic Cat & Suzuki engines

These Oil Filters
have 20 x 1mm threads,
11 psi by-pass valve,
anti-drain back valve.

AMSOil SMF 109
Bike Master 314-0025
Champion PH7016
Cycle Power 314-1919
Emgo 10-55662
Emgo 10-55660
Fram PH6018
Hi-Flo HF138
J.C.Whitney ZX063166P
K&N 138
NAPA 1359
WIX 51359
Per-Form J-509
ProPart 01-0029
Purolator ML16818
STP SMO-18
Suzuki 16510-03G00-X07
VESRAH vsf-3009
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #5 ·
Good thread on wet clutch oil.
The official what OIL to use thread!! - ArcticChat.com - Arctic Cat Forum

Oil filter info copied from arcticchat.....

For the Cat H1/H2 or Suzuki engines. the following filters cross reference.

Arctic Cat & Suzuki engines

These Oil Filters
have 20 x 1mm threads,
11 psi by-pass valve,
anti-drain back valve.

AMSOil SMF 109
Bike Master 314-0025
Champion PH7016
Cycle Power 314-1919
Emgo 10-55662
Emgo 10-55660
Fram PH6018
Hi-Flo HF138
J.C.Whitney ZX063166P
K&N 138
NAPA 1359
WIX 51359
Per-Form J-509
ProPart 01-0029
Purolator ML16818
STP SMO-18
Suzuki 16510-03G00-X07
VESRAH vsf-3009
I can work with this list. Thanks!!
 

·
Registered
Joined
·
1,173 Posts
Yup Sticky This I Use The Wixs Filters
 

·
Registered
Joined
·
88 Posts
No problem guys glad to help.

Been throuh the prowlers top to bottom and back again.

First machine was 650 put 700bbk on then did a swap to a 1000 that was lots of work. But well worth it!!!
Flop diffs new engine mounts ect.. ect... 1000cc mounts backwards vs. the single cyl machines.
Lowered seats 3" cage drop4" ect.. ect...
 

·
Registered
Joined
·
1,535 Posts
I'm going with K&N 138. They have a 1 inch hex to help with removal...
Thats the one I run on our AC ATV's. Run Rotella T oil in them with great results. Also run this in my street bike with the wet clutch.
 

·
Registered
Joined
·
986 Posts
Thats the one I run on our AC ATV's. Run Rotella T oil in them with great results. Also run this in my street bike with the wet clutch.
Have you found Rotella T to be a little thick for cold weather?? Rekluse recommends it, their explanation made sense, I made the switch, but haven't been riding yet. It's pretty chilly here in the wintertime and we usually switched to something lighter weight? My quad has enough starting issues as is.
 

·
Registered
Joined
·
88 Posts
Rotella makes a T-6 it is a syntehtic and is in almost everything I own now.
Was tired of this and that oil for everything.
It's a 5-40 synthetic and I am really liking it, Cold has not been a issue with it and I live in Alaska.
Wheelers, diesel & gas truck are all running the Rotella T-6
 

·
Registered
Joined
·
1,535 Posts
I have not run the synthetic but the conventional has worked well for me. I am in GA so it is usually not overly cold. The wheelers have been outside while camping in low 30's to high 20's and started just fine in the morning. I have noticed much better/smoother shifting in both the bike and the wheelers. The ATV's are both manuals.
 

·
Registered
Joined
·
675 Posts
thanks for the info guys that"s the same filter (fram ph6018) i use on my 700 king quad. and Ive been running a Rotella blend of 15-40 and 5-40 synthetic in that. I might just use the rotella 5-40 (t6 i think), if it seems like a good choice. I'd hate to have problems because of using the wrong oil.
 

·
Registered
Joined
·
486 Posts
Great thread-sticky it please! Great info, knowing what quality oil and filters will work. I think I will be able to use good oil and filters for an oil change for less than $65 now:p
 

·
Registered
Joined
·
488 Posts
I'm confused with this list. Everywhere I look it says to use a K&N 621 but this list says 138.
 
1 - 20 of 25 Posts
Top