[Blakeza]

It's been a while. But when I owned a 400 Art ATV...there was a bolt in the head area, and after an oil change you removed the spark plug wire, cranked and made sure oil came out the hole where the bolt was removed...?? yes?

Well now I've gotten a Prowler UTV side by side beast...

I've done a little reading...and one caution that is given is the Prowler is known to have oil pump issues...ok that I read a little on..but??

I see a "bolt" on the head on the drivers side. Is this the same deal as my ATV from the past? You can crank the motor without plug hooked up and with the "bolt" removed you can watch for oil to come out in that location...then know you are good and put the bolt back...???

Or ...is that bolt for something else? Any good images or pic's out there that show what's what on this Prowler?

Thanks in advance for any assistance here!

 

[70Bones]

After you change the oil, you just start it up, no need to take a bolt out of anywhere to check for oil. I'm really interested in where this thought came from, it's a rather bizzare concept.

 

[izom]

...never heard of either !??

which prowler youve got? neither its 650 or 1000 simple oil/filter change with oilsticks for oil-levelcheck ;-)