Wildcat Forum banner

1 - 20 of 46 Posts

·
Registered
Joined
·
721 Posts
Discussion Starter #1 (Edited)
http://www.wildcatforums.net/forum/wildcat-trail-trail-xt/15704-trail-glove-box-door.htmlHere I will document the mods to my Kat.
The name: Arctic Cat. this is a Desert Rat now. May never see snow.
The loading ramps: http://www.wildcatforums.net/forum/...74-loading-ramp-recomendation.html#post180458
The Rearview mirror:http://www.wildcatforums.net/forum/.../12088-koplin-rearview-mirror.html#post182855
EMP part number 12756 Arctic Cat Trail Gear Shift Lock: http://www.wildcatforums.net/forum/wildcat-trail-trail-xt/12656-emp-shift-lock.html#post194436
K&N 621 Oil Filter with safety wire: http://www.wildcatforums.net/forum/wildcat-trail-trail-xt/12657-1st-oil-change.html#post194440
Arctic Cat 1/4 Windscreen:http://www.wildcatforums.net/forum/...-ac-1-4-windscreen-bimini-top.html#post194445
Horn: http://www.wildcatforums.net/forum/.../10039-diy-projects-trails-14.html#post194449
AC bimini Top: http://store.arcticcat.com/product/856427/2436-000/_/Bimini_Top
Belt Temp gauge made with a mechanical water temp gauge in the CVT exhaust.
LED license plate lighted bolts from ebay
Badlands 5000 Lbs winch: http://www.wildcatforums.net/forum/...lbs-winch-installation-review.html#post210428
SSS Off Road Skid with built in rock sliders 1 piece: http://www.wildcatforums.net/forum/...oad-1-piece-skid-rock-sliders.html#post217691
Glove Box Locking Door:http://www.wildcatforums.net/forum/wildcat-trail-trail-xt/15704-trail-glove-box-door.html
Driver Side heat and dust control: http://www.wildcatforums.net/forum/wildcat-trail-trail-xt/15705-dust-heat-control.html#post245431
Seat Risers:http://www.wildcatforums.net/forum/wildcat-trail-trail-xt/15707-seat-risers.html#post245433
This Camper Mod was just for the trail: http://www.wildcatforums.net/forum/off-topic-discussion/15708-had-move-propane-tanks-back.html
Waterproofing Bimini Top: http://www.wildcatforums.net/forum/...842-water-proofing-bimini-top.html#post247670
Beard Torque seats, Pro armor 4 point harnesses, PrP harness bar: http://www.wildcatforums.net/forum/...harness-bar-pro-armor-harness.html#post547106
ProThane Rear sway bar bushings http://www.wildcatforums.net/forum/wildcat-trail-trail-xt/32850-rear-sway-bar-mounts.html#post561210

RC2 Filter with cover
New ball joints
Garage Guys replacement bushings
New brake pads

removed busted front sway bars.

To Do
Rock lights
Turn signals

Sell it and get a Newer X ldt
 

·
Administrator
Joined
·
27,696 Posts
Hope this thread doesn't get hijacked, LOL!
 
  • Like
Reactions: dragongunner

·
Registered
Joined
·
2,606 Posts
Haha, it's an Internet forum it has no chance of not happening. That being said, Hollywood feel free to delete this and my previous post if it needs to stay tidy.
 

·
Administrator
Joined
·
27,696 Posts
Haha, it's an Internet forum it has no chance of not happening. That being said, Hollywood feel free to delete this and my previous post if it needs to stay tidy.
No, just having fun with Capt Kirk, he complained about threads being hijacked. Every thread eventually goes sideways, like you said it's an internet forum. Document away Kirk, good luck with all your mods.
 

·
Registered
Joined
·
15 Posts
If you can please post a video of you backing up into your pickup. Thinking about it but for my 1500 ram. Thanks in advance
 

·
Registered
Joined
·
2,917 Posts
The Capt. has a long ways to go to catch Steveareno…..let the battle begin. Maybe there should be a thread where everyone documents their stuff…a sticky…sure would cut down on the sigs…lol.
 

·
Registered
Joined
·
721 Posts
Discussion Starter #8
luka 67; will do next time i load er up.
hollywood; i hear your phone ringing. i hear the TSA is looking for highjacker lol

The wife want wind protection so the next item will be the AC wind deflector then maybe a homemade windshield to add to that with ECM windshield mounting kit. I need a source for hard coated lexan.
then will be AJ fender extensions and roof and maybe a back window.
I will need a winch before spring.
A full array of lights for summer night running. nothing more fun than blasting through the desert at night while its still 95 degrees outside.
I found Hyundai wheels are 4 x 115mm I am going to the junk yard soon and get a set of wheels and tires so the wife can run down all the senior citizens on their golf carts on her was to the store. that way i can save the dirt tires for the fun and not wear them out on the street.
Lighted license plate bolts and mounting my old motorcycle horns to add to the mirror to keep the fuzz off my tail.
Then will be 2" spacers, better studs, 14" bead locks and 30" tires for the rocks.
Something has to be done about the weak ass front sway bar it is kinda useless and has too much slack. My jeep had a sweet torsion setup with quick disconnects.
Maybe some full doors or filler panel. out last stip out my wife got sticker and thorns in her hip.
I want to make a bigger cargo bed so the dogs can ride back there without falling out. and I want something like the AC down bars but bolting them to plastic seems dumb. I want to build my own bumpers and add to the roll cage to be more square in the back.

Thats all i can thing of so far.
highjack away

and Merry Christmas.
 

·
Registered
Joined
·
90 Posts
looking good!
 
  • Like
Reactions: Capt Kirk

·
Registered
Joined
·
244 Posts
Let me know if u find any good sources for hard coated/abrasion resistant lexan!
 

·
Premium Member
Joined
·
7,694 Posts
i like the hinged/wide bi-fold ramps to avoid the tilting of the separate ramps if slightly off...especially when backing up...my old neck doesn't like that far of a neck turn...haaaaa
 

·
Premium Member
Joined
·
7,694 Posts
I agree, a support between the 2 ramps would be nice, or a spotter who would say STOP!
and hope the spotter doesn't say oh shete before coming out with the stop!
 

·
Premium Member
Joined
·
7,694 Posts
The Capt. has a long ways to go to catch Steveareno…..let the battle begin. Maybe there should be a thread where everyone documents their stuff…a sticky…sure would cut down on the sigs…lol.
hey, i resemble that! haaaaaaa
 

·
Registered
Joined
·
8,236 Posts
I got rid of my sig because the site told me it was too big. Funny thing was it was smaller than some other sigs i see these days. Oh well, makes me more mysterious haha.
 

·
Registered
Joined
·
1,311 Posts
I find the signature a usefull tool for directing questions to the members with the gear your interested in.
 
  • Like
Reactions: DeanTeck
1 - 20 of 46 Posts
Top