Wildcat Forum banner
1 - 4 of 4 Posts

·
Registered
2014 Sport Limited
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey,
So first, english is not my Native Language so sorry if it is gross.

I'm really having problems with the Throttlecable. It's hard to push and sticky. I'd tried to adjust the cable and checked the diagnostic Menu but it reaches 95%.

My Throttlepedal broke so I fixed it. It Bented by pushing on Trails.
Hand Light meter Gesture Finger Wood



I Bendet it back in Position and welded some metal in it to make it more stable.
Tire Bicycle tire Automotive tire Wheel Wood


But after all it fells like if I push the Gaspedal it is stuck sometimes and goes very hard 2 ride. I can't drive slow because it's also hard to controll the pedal.

Someone has the Same Problems and fixed it?
Greetings from germany
 

·
Premium Member
Joined
·
1,792 Posts
Welcome, it sounds like the cable is sticking in the housing or has fraid strands and is rubbing in the cable housing. Try cleaning and lubing if not replace.
 

·
Registered
Joined
·
14 Posts
We had same issues, found the cable had a spot where the outer protective coating had gotten rubbed off. That allowed water etc to get into the cable, no cleaning or oil helped. Had to change to cable.
 

·
Registered
Joined
·
46 Posts
I have the exact same problem going on, I did the same with the throttle peddle, straightened it and braced it and ordered a new throttle cable.


Sent from my iPhone using Tapatalk
 
1 - 4 of 4 Posts
Top