Wildcat Forum banner

Trail 700 engine rebuild

4K views 3 replies 3 participants last post by  Justheman80 
#1 ·
I am in the process of rebuilding my engine. Had one of the connecting rods seize onto the crank. I can get the crank ground down but I will need undersized bearing for the crankshaft bearings. Does anyone know where I can get undersized bearings? Currently my bearings are Black, Black Green. Does anyone know the specs for these bearings? Thanks in advance.
 
#3 ·
Pretty solid engines. Have heard of a handful of these issue, seems they are usually associated with low oil.
 
#4 ·
Found this info in another thread on this forum.

Rebuilding Engine on 2016 XT Trail

Red - 1.495"~1.498" P/N: 13221-KKE5-E00
Green - 1.494" ~1.491" P/N: 13222-KKE5-E00
Black - 1.486" ~ 1.490" P/N: 13223-KKE5-E00
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top