Wildcat Forum banner
1 - 16 of 16 Posts

·
Vendor
Joined
·
1,629 Posts
Discussion Starter · #1 ·

UTVinc.com is theindustry leader in new product design, development, and testing we manufactureour products here in the USA. With more new products available for more UTV’sper month than anyone else, this has separated UTVinc from the pack time andtime again. This time is no different; we have yet another new product toshowcase for you today.
New Product ReleaseUTVinc.com

www.UTVinc.com Introduces our new LEDLight Bar Mounts. We Designed these Light bar Mounts with a lot of flexibilityin it to mount on most UTV Roll Cages. These new LED lightbar mounts make aeasy job of mounting a UTVinc 30” LED bar. CNC Machined from T-6 6061 Billet Aluminumthese Clams come in RAW Machined Aluminum or Black Anodized and Fit 1 ¾” Tubing
Price is 74.95 Per Set





Your Mounting Bar must be at least 33” Long for these towork with a 30” LED Light Bar
Prefect fit on the Arctic Cat Wildcat for a UTVinc or RigidIndustries LED Light Bar
UTVinc designs, manufactures, fabricates, packages, markets, andsells parts & products for the UTV industry for all major manufactures ofUTV’s and side by sides. UTVinc is located in Phx, AZ at 4244 W Dunlap Ave.UTVinc can be reached either by visiting the website 24/7 at www.UTVinc.com or calling the retaillocation at 623-934-3070, Monday-Saturday 9am – 6pm.
 

·
Vendor
Joined
·
1,629 Posts
Discussion Starter · #2 ·
[h=1]UTV INC PRIVATE LABEL 30" LED LIGHT BAR[/h]
Email to a Friend
Be the first to review this product
Availability: In stock
$799.95
Qty:Add to Cart-OR-


OR
[h=2]Quick Overview[/h]30" LED LIGHT BAR WITH A COMBO BEAM (FLOOD/SPOT/FLOOD)
EASY SIDE MOUNTING OPTION WITH TABS INCLUDED
LED LIGHTED ON/OFF SWITCH & WIRING INCLUDED WITH RELAY, FUSE & LOOM
11,000 LUMENS
9 AMP DRAW




Double click on above image to view full picture



[h=2]More Views[/h]
 

·
Registered
Joined
·
945 Posts
Johnny...man I sure wish you had a roof so that you could figure out just where that light needs to sit.....are you guys going to come up with a UTV made roof? Oh.....I don't mean to hijack your post...LOL:pat:
 

·
Registered
Joined
·
1,325 Posts
Johnny...man I sure wish you had a roof so that you could figure out just where that light needs to sit.....are you guys going to come up with a UTV made roof? Oh.....I don't mean to hijack your post...LOL:pat:
:hijacked::tool::wtf1::damnit: Bad fox! Johnny I asked in the other thread probably should have asked here do you think its possible to mount a 40 inch underneath instead of on top? Reply to either I'll find it!
 

·
Registered
Joined
·
1,325 Posts
I just have to beat 10800 I got him to fess up to which bar he got, makes it a bit easier. Whats the point of barely going over why not just blind him instead?
 

·
Vendor
Joined
·
3,042 Posts
UTVinc.com is theindustry leader in new product design, development, and testing we manufactureour products here in the USA. With more new products available for more UTV’sper month than anyone else, this has separated UTVinc from the pack time andtime again. This time is no different; we have yet another new product toshowcase for you today.
New Product ReleaseUTVinc.com

www.UTVinc.com Introduces our new LEDLight Bar Mounts. We Designed these Light bar Mounts with a lot of flexibilityin it to mount on most UTV Roll Cages. These new LED lightbar mounts make aeasy job of mounting a UTVinc 30” LED bar. CNC Machined from T-6 6061 Billet Aluminumthese Clams come in RAW Machined Aluminum or Black Anodized and Fit 1 ¾” Tubing
Price is 74.95 Per Set





Your Mounting Bar must be at least 33” Long for these towork with a 30” LED Light Bar
Prefect fit on the Arctic Cat Wildcat for a UTVinc or RigidIndustries LED Light Bar
UTVinc designs, manufactures, fabricates, packages, markets, andsells parts & products for the UTV industry for all major manufactures ofUTV’s and side by sides. UTVinc is located in Phx, AZ at 4244 W Dunlap Ave.UTVinc can be reached either by visiting the website 24/7 at www.UTVinc.com or calling the retaillocation at 623-934-3070, Monday-Saturday 9am – 6pm.
 

·
Vendor
Joined
·
3,042 Posts
UTVinc.com is theindustry leader in new product design, development, and testing we manufactureour products here in the USA. With more new products available for more UTV’sper month than anyone else, this has separated UTVinc from the pack time andtime again. This time is no different; we have yet another new product toshowcase for you today.
New Product ReleaseUTVinc.com

www.UTVinc.com Introduces our new LEDLight Bar Mounts. We Designed these Light bar Mounts with a lot of flexibilityin it to mount on most UTV Roll Cages. These new LED lightbar mounts make aeasy job of mounting a UTVinc 30” LED bar. CNC Machined from T-6 6061 Billet Aluminumthese Clams come in RAW Machined Aluminum or Black Anodized and Fit 1 ¾” Tubing
Price is 74.95 Per Set





Your Mounting Bar must be at least 33” Long for these towork with a 30” LED Light Bar
Prefect fit on the Arctic Cat Wildcat for a UTVinc or RigidIndustries LED Light Bar
UTVinc designs, manufactures, fabricates, packages, markets, andsells parts & products for the UTV industry for all major manufactures ofUTV’s and side by sides. UTVinc is located in Phx, AZ at 4244 W Dunlap Ave.UTVinc can be reached either by visiting the website 24/7 at www.UTVinc.com or calling the retaillocation at 623-934-3070, Monday-Saturday 9am – 6pm.
 

·
Vendor
Joined
·
3,042 Posts
UTVinc.com is theindustry leader in new product design, development, and testing we manufactureour products here in the USA. With more new products available for more UTV’sper month than anyone else, this has separated UTVinc from the pack time andtime again. This time is no different; we have yet another new product toshowcase for you today.
New Product ReleaseUTVinc.com

www.UTVinc.com Introduces our new LEDLight Bar Mounts. We Designed these Light bar Mounts with a lot of flexibilityin it to mount on most UTV Roll Cages. These new LED lightbar mounts make aeasy job of mounting a UTVinc 30” LED bar. CNC Machined from T-6 6061 Billet Aluminumthese Clams come in RAW Machined Aluminum or Black Anodized and Fit 1 ¾” Tubing
Price is 74.95 Per Set





Your Mounting Bar must be at least 33” Long for these towork with a 30” LED Light Bar
Prefect fit on the Arctic Cat Wildcat for a UTVinc or RigidIndustries LED Light Bar
UTVinc designs, manufactures, fabricates, packages, markets, andsells parts & products for the UTV industry for all major manufactures ofUTV’s and side by sides. UTVinc is located in Phx, AZ at 4244 W Dunlap Ave.UTVinc can be reached either by visiting the website 24/7 at www.UTVinc.com or calling the retaillocation at 623-934-3070, Monday-Saturday 9am – 6pm.
 

·
Vendor
Joined
·
3,042 Posts
UTVinc.com is theindustry leader in new product design, development, and testing we manufactureour products here in the USA. With more new products available for more UTV’sper month than anyone else, this has separated UTVinc from the pack time andtime again. This time is no different; we have yet another new product toshowcase for you today.
New Product ReleaseUTVinc.com

www.UTVinc.com Introduces our new LEDLight Bar Mounts. We Designed these Light bar Mounts with a lot of flexibilityin it to mount on most UTV Roll Cages. These new LED lightbar mounts make aeasy job of mounting a UTVinc 30” LED bar. CNC Machined from T-6 6061 Billet Aluminumthese Clams come in RAW Machined Aluminum or Black Anodized and Fit 1 ¾” Tubing
Price is 74.95 Per Set





Your Mounting Bar must be at least 33” Long for these towork with a 30” LED Light Bar
Prefect fit on the Arctic Cat Wildcat for a UTVinc or RigidIndustries LED Light Bar
UTVinc designs, manufactures, fabricates, packages, markets, andsells parts & products for the UTV industry for all major manufactures ofUTV’s and side by sides. UTVinc is located in Phx, AZ at 4244 W Dunlap Ave.UTVinc can be reached either by visiting the website 24/7 at www.UTVinc.com or calling the retaillocation at 623-934-3070, Monday-Saturday 9am – 6pm.
 
1 - 16 of 16 Posts
Top