Wildcat Forum banner

41 - 60 of 265 Posts

·
Administrator
Joined
·
27,617 Posts

·
Registered
Joined
·
404 Posts
I might be out for a day trip on the 28th. Get there around 8 and ride for a few hours.

What radio channel are you using?
 

·
Administrator
Joined
·
27,617 Posts
I might be out for a day trip on the 28th. Get there around 8 and ride for a few hours.

What radio channel are you using?
Loco Moco, what else, LOL.
 

·
Registered
Joined
·
873 Posts
Installed 42" curved single row light bar up front and rear amber strobes.
Curved light bar, radius cage, composite roof at varying angles made the install tumultuous trying to keep a nice level clean look.
Couldn't use the cage clamps so had to drill into it..

And ended up blowing the led lights in the switches in the process..arghh.
 

·
Registered
Joined
·
873 Posts
Rear amber strobes
Horn
Kenwood 65w radio and antenna
Tusk front bumper
Center mirror
Spare tire mount with cooler rack
Front light mounts and wiring for the hood grill inset. (waiting for the lights)
Paddles just ordered.
 

·
Registered
Joined
·
617 Posts
Clamps weren't tight?
 

·
Registered
Joined
·
14 Posts
I fabricated some mounts for my side mirrors. I wanted them low, but I run a half windshield. These are made from .125 stainless. The “nuts” are a 10 x 1.5 stainless coupling nuts cut in half to about 14mm long. I did get new cage bolts since it’s impossible to find stainless coupling nuts in 1.25 mm pitch. The longer nuts were necessary to bottom out in the cage pocket. I simply reversed the bolts to the inside of the a pillar. The radius on the mounting tab matches the mirror mount.
 

Attachments

·
Registered
Joined
·
70 Posts
My 1/2 windshield finally arrived today so I put it on.
Then i found where both R tires are leaking... bead.
I also hit a few spots with touch up paint.
 

·
Administrator
Joined
·
27,617 Posts
My 1/2 windshield finally arrived today so I put it on.
Then i found where both R tires are leaking... bead.
I also hit a few spots with touch up paint.
Beads are sometimes tough to seat. After tightening the bead down again, if it still leaks, take out the inner valve, and dump some liquid starch in. About 10 - 16 ounces.
 
41 - 60 of 265 Posts
Top