Wildcat Forum banner

2681 - 2700 of 2723 Posts

·
Registered
Joined
·
143 Posts
Custom built third seat and harness bar.
Bump seat adjusts to childs shoulder height for best harness fitment.
Ready to rip as a family! :)




Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
393 Posts
So much easier working on a clean machine lol
 

·
Registered
Joined
·
393 Posts
Finally got the satv front arms, rhino axles, and kryptic tie rods in.
 

Attachments

·
Registered
Joined
·
56 Posts
Finally got the satv front arms, rhino axles, and kryptic tie rods in.
I just did this install on my machine as well.. They are great, and well worth the price over the OEM arms. My rear shock reservoir is backing on the arms, though.. I should have tapped them down with a hammer a bit to stop it. Thankfully, nothing has happened to the shocks. From what I know :|
 

·
Registered
Joined
·
393 Posts
My rears do the same with the Elkas. It's very light contact, just enough that it rubbed the paint off the arms. I think I'm going to try and file down the bottom lip of the shock reservoir instead of smashing the a arm. The reservoir is aluminum so it should be fairly easy.
 

·
Registered
Joined
·
393 Posts
Finished it up today. Just gotta cut the roof where the angle bars go in.
 

Attachments

·
Registered
Joined
·
58 Posts
20181123_155343_resized.jpg 20181123_155410_HDR_resized.jpg

Ezryde is on.... springs were a bear.

LED Headlights in ....way easier.... threw in a Speedwerks secondary spring while I was jacking around....she runs sweet!
 

·
Registered
Joined
·
393 Posts
I bought the spring tool from speedwerx back when i got the stiffer pedal spring. Makes pulling the muffler much easier.
 
2681 - 2700 of 2723 Posts
Top