Wildcat Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
277 Posts
Discussion Starter · #1 ·
Thinking about going with a 14" wheel with a 4+3 offset front and back. Will this offset work or is will it be harder on parts?
 

·
Registered
Joined
·
1,173 Posts
I Have 4+4 on Mine
 

·
Registered
Joined
·
97 Posts
It will work. You may want to look at the Full of Mud's photos of his tires and wheels. They are Sick...
Does the Vision 161 in the 12" 4+4 fit on the rear of the wildcat? I'd order a pair of 12s for the rear and some 14s for the front if they do!
 

·
Premium Member
Joined
·
1,088 Posts
Unfortunately we do not have a Wildcat here to test fit the 12 inch rears. We just do not know if it would clear the breaks since it comes with 14's standard.

Maybe someone on here has had a chance to test fit the 12 inch size on the rear.
 

·
Registered
Joined
·
11,034 Posts
unfortunately we do not have a wildcat here to test fit the 12 inch rears. We just do not know if it would clear the breaks since it comes with 14's standard.

Maybe someone on here has had a chance to test fit the 12 inch size on the rear.
14" hiper carbon fiber double beadlocks clear by a 1/8 of an inch on the front brakes and will not go over the rear upper raduis arm. Had to go with 3" inside for them to work
 

·
Registered
Joined
·
527 Posts

·
Premium Member
Joined
·
1,088 Posts
Full of Mud bought an aftermarket wheel lug kit. They cost $45.00 for the kit. Normally when you buy aftermarket wheels you also purchase a wheel lug kit.

Give us a call if you would like to place an order.
 

·
Registered
Joined
·
1,173 Posts
What lug nuts were used with full of muds wheels, we're the stock studs long enough?
Yes I Did & Well Worth It You Even Get A Fanny Lock Socket For It So You Dont Have To Worry About
Coming Out Of The Bar & Finding You Cat Up On Blocks:D
 
  • Like
Reactions: TxChristopher

·
Registered
Joined
·
116 Posts
I apologize in advance for the dumb question, but I don't know sh*t about tires/wheels on SxS's. Will the following combo fit on my W/c.

4/115 ITP SS212 Alloy Series Wheel 14x6 4.0 + 2.0 Machined - 2012 Arctic Cat WILDCAT 1000i H.O. (Front) Part # 1240470008

4/115 ITP SS212 Alloy Series Wheel 14x8 5.0 + 3.0 Machined - 2012 Arctic Cat WILDCAT 1000i H.O. (Rear) Part # 1240470013

Mounted on 26X9X14 front and 26X11X14 Rear BigHorns.

Thanks,
Dan
Great Info. Had those wheels on my Rhino the state of CA. forced me to sell. I want them on my cat. 2013 1000 4 seater. Can anyone tell me the width of the factory wheels fron and rear?
 
1 - 17 of 17 Posts
Top