Wildcat Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hey everyone, I have a 2014 Wildcat Trail and it's knocking in the rear end. Mostly when turning. It's definitely the transaxle. I'm in the process of removing the transaxle and I'm at the point where the only thing left is the drive shift going to the front diff. Has anyone removed the transaxle without removing the whole front diff? I was going to try disconnecting the front diff and see if I could slide it forward enough to get the transaxle out.
Any advice would be appreciated.
 

·
Premium Member
Joined
·
1,822 Posts
Search on here there is threads about moving it forward.
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #4 ·
To answer my own question.....no you do not need to remove the engine. Once everything is disconnected and the mounting bracket removed it comes out the left side. The motor had a lot of wiggle room. I pushed it forward to make more room.
 

·
Premium Member
Joined
·
1,822 Posts
Look at doing carrier bearing while you have things apart.
 
1 - 6 of 6 Posts
Top